- Mounting Type : Inset into Soil
- Description : Soil 3 in 1 sensor, Soil Temperature Humidity EC Sensor
- Model Number : RD-STME-P-01
- Type : Humidity Sensor, 3 in 1 meter sensor
-
Usage : Soil Temperature Humidity EC Sensor
- Theory : FDR
- Output : RS485/4-20mA/0-5V/0-10V
- Product name : Soil moisture and temperature EC 3 in 1 sensor
- Key words : Soil sensors for the Agriculture and farm
- Output signal : RS485 Mudbus
- Wireless type-1 : LORA/LORAWAN EU868MHZ 915MHZ 434MHZ
- Wireless type-2 : GPRS(DTU)/WIFI
- MOQ : 1PC
- Key words-1 : Soil moisture sensot
- Key words-2 : Soil temperature sensor
- Key words-3 : Soil EC sensor
Product Description
Product Name |
Soil Moisture and temperature and EC 3 in 1 sensor |
Probe type |
Probe electrode |
Measurement parameters |
Soil moisture and temperature and EC value |
Temperature Measuring range |
-30 ~ 70 ° C |
Temperature Measurement accuracy |
±0.2°C |
Temperature Measurement resolution |
0.1℃ |
Moisture Measuring range |
0 ~ 100%(m3/m3) |
Moisture Measurement accuracy |
±2% (m3/m3) |
Moisture Measurement resolution |
0.1%RH |
EC Measuring range |
0~20000μs/cm |
EC Measuring accuracy |
±3% in the range of 0-10000us/cm; ±5% in the range of 10000-20000us/cm
|
EC Measuring resolution |
10 us/cm |
Outputsignal |
A:RS485 (standard Modbus-RTU protocol, device default address: 01) |
Output signal with wireless |
A:LORA/LORAWAN |
B:GPRS |
|
C:WIFI |
|
D:NB-IOT |
|
Supply voltage |
12~24VDC (when the output signal is 0~5V, 0~10V, 4~20mA) |
Power consumption |
≤0.15W(@12V,25° C) |
Working temperature range |
-30 ° C ~ 70 ° C |
Stabilization time |
<1 second |
Response time |
<15 seconds |
Sealing material |
ABS engineering plastic, epoxy resin |
Waterproof grade |
IP68 |
Cable specification |
Standard 2 meters (can be customized for other cable lengths, upto 1200 meters) |
Details Images
Product Usage
Soil Surface measure method
1. Select a representative soil environment to clean up surface debris and vegetation
2. Insert the sensor vertically and completely into the soil
3. If there is a hard object, the measurement location should be replaced and re-measured
4. For accurate data, it is recommended to measure multiple times and take the average
2. Insert the sensor vertically and completely into the soil
3. If there is a hard object, the measurement location should be replaced and re-measured
4. For accurate data, it is recommended to measure multiple times and take the average
Buried measure method
1. Make a soil profile in the vertical direction, slightly deeper than the installation depth of the bottommost sensor, between 20cm and 50cm in diameter.
2. Insert the sensor horizontally into the soil profile
3. After the installation is completed, the excavated soil is backfilled in order, layered and compacted, and horizontal installation is guaranteed.
4. If you have the conditions, you can put the removed soil in a bag and number it to keep the soil moisture unchanged, and backfill it in reverse order.
2. Insert the sensor horizontally into the soil profile
3. After the installation is completed, the excavated soil is backfilled in order, layered and compacted, and horizontal installation is guaranteed.
4. If you have the conditions, you can put the removed soil in a bag and number it to keep the soil moisture unchanged, and backfill it in reverse order.
Three-tier installation
Six-tier installation
Measure Notes
1. All probe must be inserted into the soil during measurement.
2. Avoid excessive temperature caused by direct sunlight on the sensor. Pay attention to lightning protection in the field
3. Do not pull the sensor lead wire with force, do not hit or violently hit the sensor.
4. The protection grade of the sensor is IP68, which can soak the entire sensor in water.
5. Due to the presence of radio frequency electromagnetic radiation in the air, it should not be energized in the air for a long time.
2. Avoid excessive temperature caused by direct sunlight on the sensor. Pay attention to lightning protection in the field
3. Do not pull the sensor lead wire with force, do not hit or violently hit the sensor.
4. The protection grade of the sensor is IP68, which can soak the entire sensor in water.
5. Due to the presence of radio frequency electromagnetic radiation in the air, it should not be energized in the air for a long time.
Weight | 0.5kg |
---|---|
Colour | Brown |
Size | Large, Medium, Small |
Fabric | Suede |