-
Condition : New
- Warranty : 1 Year
- Showroom Location : None
- Applicable Industries : Farms
- Key Selling Points : Sustainable
- Marketing Type : Hot Product 2019
- Machinery Test Report : Provided
- Video outgoing-inspection : Provided
- Warranty of core components : 1 Year
- Core Components : Pump
- Product name : PC100 Pressure Compensating Driptape with Anti-Siphon
- Brand : Chrip Drip
- Application : Agriculture Irrigaiton
- Roll length : 500m
- Thickness : 0.4-0.6mm
- Certification : ISO9001:2008
- Working pressure : 1-3Bar
- Diameter : 16 mm
- Flow rate : 1.6/2.0L/H
- After-sales Service Provided : Online support
- Local Service Location : None
PC Drip Irrigation Pipe
Drip irrigation pipe is polyethylene pipe with either 1.6L/H,2L/Hemitters extruded into the pipe at the factory. Since the emitters are already installed, all you do is roll out the pipe and connect it to your main water source. The cost is just slightly higher than if you inserted the emitters yourself, but the installation time is greatly reduced. In-Line Emitter pipe can be used on long or short rows, flat or hilly terrain, raised beds, in loops around trees, or in straight lines for hedges and windrows. We offer this in a variety of emitter spacing.
Drip Irrigation Pipe Features
Diameter: 16mm
Thickness: 0.4/0.6/0.8/1.0mm
Working pressure: 1.0-3.0Bar
Dripper spacing: 20/30/50/100(according to your requirement)
Flow rate: 1.6/2(L/H)
Quantity per roll: 500/700/800m
1. Working pressure: 0.5-3.5Bar
2. Filtration Required: Above 120mesh
3. Lay in line and levelly, all the holes of emitter must be upward.
4. Suitable for the planing on hills and mountains, or Sub-surface multi seasonal row crop.
Weight | 0.5kg |
---|---|
Colour | Brown |
Size | Large, Medium, Small |
Fabric | Suede |